- Simpler formulations of rest terms.
- Players without history in the league are now given a prior ability somewhat worse than the league average player.
- The strength of the penalties which bind player's estimates to their prior estimate are now proportional to the icetime in the later season. This means that players who play very few minutes change their estimate very little.

I would like to be able to isolate the individual impact of a given skater on shot rates
from the impact of their teammates, their opponents, the scores at which they play, the
zones in which they begin their shifts, the instructions of their head coach, their level
of fatigue, how far away their bench is, and home-ice advantage. I have fit a regression model
which provides such estimates. The most important feature of this model is that I use *shot
rate maps* as the units of observation and thus also for the estimates themselves, permitting
me to see not only what portion of a team's performance can be attributed to individual players
but also detect patterns of ice usage.

Here, as throughout this article, "shot" means "unblocked shot", that is, a shot that is recorded by the NHL as either a goal, a save, or a miss (this latter category includes shots that hit the post or crossbar). I would prefer to include blocked shots also but cannot since the NHL does not record shot locations for blocked shots.

The most sophisticated element of Magnus is the method for estimating the marginal effect of
a given player on shot rates; that is, that portion of what happens when they are on the ice
that can be attributed to their individual play and not the context in which they are placed.
We know that players are affected by their teammates, by their
opponents, by the zones their coaches deploy them in, and by the prevailing score while they play.
Thus, I try to *isolate* the impact of a given player on the shots which are taken and
where they are taken from.

**Although regression is more mathematically sophisticated than some other measures, it is
in no way a "black box". As we shall see, every estimate can be broken down into its
constituent pieces and scrutinized. If you are uneasy with the mathematical details but
interested in the results, you should skip the "Method" section and just think of the method
as like a souped-up "relative to team/teammate statistics", done properly.**

I use a simple linear model of the form \( Y \sim WX\beta \) where \(X\) is the
*design matrix*, \(Y\) is a vector of *observations*, \(W\) is a weighting matrix,
and \(\beta\) is a vector
of *marginals*, that is, the impacts associated to each thing, independent of each other
things. Each passage of 5v5 play with no substitutions is encoded in the model as **two**
rows, one row with the home
team as the attacking team, where the response entry in \(Y\) is the pattern of shots taken
by the home team, and another row with the road team as the attacking team, where the response
entry in \(Y\) is their pattern of shots. I call such passages of play with no substitutions "stints",
by analogy with the same term used in basketball research, although the presence of on-the-fly changes
in hockey mean that some stints can be very short. Note also that a single stint can contain
within it several stoppages of play, including a variety of faceoffs, so long as the players
on the ice do not change. A typical
NHL season contains about a quarter million stints and so our design matrix \(X\) has about
half a million rows. Happily, as we shall see imminently, there are only about two thousand
covariates, so \(X\) has about
a billion entries, most of which are zero. This is computationally non-trivial but still tractable
with a level head and some half-decent computers.

The columns of \(X\) correspond to all of the different features that I include in the model. There are broadly, two different types of columns. Some terms occur in pairs, one for offence, one for defence:

**Player**performance estimates, two columns for each skater: one for their offensive impact (that is, on their own team's shot rates), and one for their defensive impact (that is, on their opponent's shot rates);**Coach**impacts: for the head coach of each team:- One pair for general impact (attacking/defending), meant to serve as an umbrella for the effect the coach's general-purpose instructions have on how the players on the ice choose to play;
- Pairs of attacking/defending indicators for each of the following score states:
- Trailing by two,
- Trailing by one,
- Tied,
- Leading by one, and
- Leading by two;

- Finally, a pair of attacking/defending "shell" indicators used only in "turtling" positions, that is, when tied or leading by one or two in third periods; these times are chosen because score effects are driven primarily by leading teams.

**Rest**impacts: three rest patterns:- Played neither last night nor the night before ("well rested");
- Did not play last night but did play the night before ("normal"); and
- Played last night but did not play the night before ("tired").

The remaining terms apply only to the offensive team:

**Score**impacts: seven columns for various different scores:- trailing by three or more,
- trailing by two,
- trailing by one,
- tied,
- leading by one,
- leading by two, and
- leading by three or more.

**Zone**impacts: four columns for the zones in which attacking players start their shifts. The four "shift start types" that I use are:- Offensive Zone,
- Neutral Zone,
- Defensive Zone, and
- On the fly.

*cannot*be easily broken down according to location.**Game Time and Venue**: six columns indicating if the attacking players are the home or the road team and which period the stint is in:- Home Team 1st Period,
- Home Team 2nd Period,
- Home Team 3rd Period,
- Away Team 1st Period,
- Away Team 2nd Period,
- Away Team 3rd Period,

**Penalty Residuals**: two columns for 5v5 play immediately following an expired penalty, before any whistle or stoppage. One of the indicators is for the team that was previously short-handed and one for the team which previously had more skaters.

The entries in \(Y\), the "responses" of the regression, are *functions* which encode the rate at which unblocked shots are
generated from various parts of the ice.
An unblocked shots with NHL-recorded location of \((x,y)\) is encoded as a two-dimensional gaussian
centred at that point with width (standard deviation) of ten feet; this arbitrary figure is chosen
because it is large
enough to dominate the measurement error typically observed by comparing video observations with
NHL-recorded locations and also produces suitable smooth estimates.

One detailed example (with no-longer current players for either team, but no matter) should make the structure of the model clear:

Suppose that the Senators are the home team and the Jets are the away team, and at a given moment of open play two Senators players (say, Karlsson and Phaneuf) jump on the ice, replacing two other Senators. This begins a new "stint". The score is 2-1 for Ottawa in the third period, and the other players (say, Pageau, Hoffman, and Stone for Ottawa, against Laine, Ehlers, Wheeler, Byfuglien, and Enstrom) began their shift some time previously on a faceoff in Ottawa's zone. Play continues for 50 seconds, during which time Ottawa takes two unblocked shots from locations (0,80) and (-10,50) and Winnipeg takes no shots. This shift ends with the period and the players leave the ice. The game is the season-opener for Winnipeg, but Ottawa played their first game yesterday, using all of the named players except Phaneuf, who was scratched in that game for unspecified reasons, causing a great deal of unproductive twittering.

These fifty seconds are turned intoSecond, the same fifty seconds are made into another observation where the Jets players are considered
the attackers, and the Senators are the defenders. The attacking player columns for the Jets are set
to 1, the defending columns for the Senators players are set to 1. Since the Jets are *losing*,
the score column of "trailing by one" is set to one. Since all of the Jets skaters are in
the middle of an offensive-zone shift, the "OZ" term is marked as 1; the Senators shift start
locations are not considered here.
The columns for "Guy Boucher, defending
coach", and "Guy Boucher, shell defence", and "Paul Maurice, attacking coach" are each marked with a one,
and all the other coaching columns are marked with zeros.
Since all of Winnipeg players are well-rested, no rest columns are marked for offence. Phaneuf
is well-rested for Ottawa, but the other four skaters played last night, so the column for
"played last night, defenders", is marked with 0.8, since 80% of the defending skaters did so.
All the other other rest columns are marked with zeros.
The two rows have no non-zero columns in common. Since the Jets didn't generate any shots, the
associated function is the zero function; I subtract league average shot rate from this and the
result is placed in the observation vector \(Y\).

The weighting matrix \(W\), which is diagonal, is filled with the length of the shift in question. Thus, the above two rows will each have a weight of fifty.

By controlling for score, zone, teammates, and opponents in this way, I obtain estimates of each players individual isolated impact on shot generation and shot suppression.

To *fit* a simple model such as \(Y = WX\beta \) using ordinary least squares fitting is
to find the \(\beta\) which minimizes the total error $$||Y-X\beta||_W^2$$
where \(||x||_W = \sqrt{x^TWx}\) is the "\(W\)-norm".
Since \(X\beta\) is the vector of model-predicted results (where \(\beta\) is the set of
model measurements and \(X\) is the circumstances we observe them in),
the difference between \(X\beta\) and the observed results \(Y\) is a measure of error; forming
the weighted product of \(Y-X\beta\) with itself is squaring this error
(to ensure it's positive), and then we want to minimize this total error: hence the name "least
squares".

When the entries of \(Y\) are numbers,
this error expression is a one-by-one matrix which I naturally identify with the single number it contains,
and I can find the \(\beta\) which minimizes it by the usual methods of matrix differentiation.
To extend this framework to our situation, where the elements of \(Y\) are shot maps, I use
a dissection of the half-rink into ten-thousand pieces, as a hundred-by-hundred grid. This divides
the rink up into parcels one foot long by 0.85 feet wide, sufficiently coarse to permit
efficient computation and sufficiently fine to appear smooth when results are gathered together.
In particular, since the input shot data is smoothed into sums of gaussians *before* the
regression is fit, we can compute the regression as if it were ten thousand separate regressions
whose outputs are combined to form the maps for each term. It might be helpful to imagine a video
broadcasting system, where input video is spliced into channels, each channel modified by
appropriate filters for the display media at hand, and then each channel organized into an
output which viewers can percieve as a single object.
The practical benefit of this is that I can use the well-known formula for the \(\beta\) which
minimizes this error, namely
$$ \beta = (X^TX)^{-1}X^TWY $$ which makes it clear that the units of \(\beta\) are the same as those
of \(Y\); that is, if I put shot rate maps in, I will get shot rate maps out.

However, I choose not to fit this model with *ordinary* least-squares, preferring instead to use
*generalized ridge regression*; that is,
instead of minimizing \( ||Y - X\beta||_W \) as in ordinary least squares, I add
two so-called *ridge penalties*, to instead minimize:
$$ ||Y - X\beta||_W^2 + ||\beta-\beta_0||_\Lambda^2 + ||\beta||_K^2$$
We consider three separate ways to measure *how wrong* the measurements \(\beta\) are:
the first term says that deviation from the given year's data is bad; the second term says that
deviations from our prior estimates \(\beta_0\) are bad, and the third term says that
deviations from zero (that is, from league average) are bad. The matrixes \(W\), \(\Lambda\), and
\(K\) control how bad specific deviations are to be considered. I call \(||\beta-\beta_0||_\Lambda^2\)
the "historical penalty" and \(||\beta||_K^2\) the "structural penalty", and they are explained
in detail below.

Although the exposition here focusses on 2021-2022, the most-recent season of NHL hockey as I write this, in practice I fit this model successively, first on 2007-2008, the first season for which the NHL provides data at this level of detail, and then repeating the process for all subsequent seasons. Thus, after each season, I have a suite of estimates of player ability which I do not throw away. Since I am trying to estimate player ability (not performance), I take the opinion that our estimates ought to change slowly, since a player's athletic ability also usually changes slowly. Furthermore, the game of hockey itself also changes (that is, its rules change, and also teams in the aggregate choose their players and playstyles differently) but does so slowly. Thus, every term in the model is biased towards its value from the previous season. This is done by taking \(\beta_0\) to be the \(\beta\) from the previous season, and populating the diagonal elements of \(\Lambda\) itself with the estimated precisions from the previous season.

Every year, however, the league contains players who did not play in the previous season at all, for which prior estimates cannot be found in this way. In the past I have used "league average" for such players, which, while simple, is not at all satisfactory. This year I have chosen a "replacement level" of -5% of league baseline for offence and +1% of league baseline for defence. These numbers were chosen by using an earlier version of this model to consider the following cohort of players: players with no NHL experience in previous years who played no more than 7 minutes per game (for forwards) or 12 minutes per game (for defenders); these thresholds approximately mark the the first decile of icetime per game. I used this somewhat ad-hoc-ily defined group of players as players who were, broadly, not wanted by their coaches and managers at all, but instead pressed into service for lack of alternatives. Measuring the impact of these players after completing their first year provides the (-5%,+1%) estimate given above; I then adopt that as replacement level under the logic that such players presumably were approximately this good before they played in the league at all. In 2007-2008, with no prior year of data to guide me, I use this replacement level for every player.

The structural penalty \(||\beta||_K^2\) is somewhat more technical and has several sub-components.

Very generally, even
without knowing that the players are specific humans with histories, we also know that they
are, by definition, NHL players. This knowledge includes, diffusely, a great deal of information;
that they fall within a given age range, that they are almost certainly from certain countries
and not others, that they have a track record of playing high-level hockey of one type or another,
and so on. In short, they are *selected* members of a population about which we know (quantitatively),
quite a bit before we watch any shifts of hockey played.
Furthermore, the athletic
abilities themselves which we are primarily interested in are constrained, very generally, by
what we know about the possibilities of human performance, and ultimately by physics itself.
The structural penalty allows us to
encode our prior belief that all of the players are drawn from this population, here understood
to be centred at league average (that is, mediant) shot rate. The size of the entries in the
diagonal of \(K\) allow us considerable flexibility; small values encode a belief that the league
has a broad range of talent, large values encode a belief that the talent level of the league as
a whole is tightly clustered. For the players, we use a numerical value of ten thousand. I am not
in a position to compute precisely what parameter would be optimal, but rough out-of-sample testing
suggests it should be near this value.

(More involved theoretical estimates of optimal penalty values (such as computing the generalized cross-validation error, following Brian MacDonald (Section 5.3)) suggest much smaller values which give wildly varying (and hence unphysical) year-to-year estimates of player ability.)

A truly disciplined modeller would have used the league average from the **previous**
year, in order to maintain faithful observance of using only **prior** data in specifying
the prior, but I have cheated slightly and used the data from the season at hand instead. I
crave the reader's forgiveness.

Players that we expect *before we see their on-ice results or circumstances* to be of
similar ability can be *fused*, that is, penalty terms can be introduced to encode our
**prior** belief that they are similar. I have chosen to fuse the Sedins in this way, with
a penalty term of weight 10,000, because they are twins. I don't consider any more-distant relation
than twins as legitimate grounds for this kind of prior.

For the various coaching terms, I use a penalty of one hundred thousand, ten times as high as the player penalties. This is a reversion of a previous change; to my surprise out-of-sample testing shows that better predictions are obtained with a much tighter range of coaching impacts.

For the score columns, the zone columns, the rest columns, and the venue-period terms (in short, for all of the terms that measure the impact of a thing that is not a human) I use a penalty value of 0. These terms are not theoretically constrained, and the fitting in this region of the model is like ordinary-least-squares fitting. I do not expect any overfitting in these terms because they all have very large data support.

Finally, I apply a set of penalties to encode prior knowledge about how the various structural
terms are distributed, so that certain sets of terms can be "pooled" properly. For example;
whatever the particulars of who starts which shifts in which zones, we expect that the *total*
impact of zone starts on the entire league over a season to be zero, since every effect that helps
one team should have a matching effect hurting their opponents. In previous iterations of this
model I have worked around this by using one shift-start state (on-the-fly) as the "reference"
state, thus having no model term, and then using indicators variables for the others (neutral zone,
defensive zone, and offensive zone). However, this is a shade clumsy, requiring us to understand
every term as "change from an on-the-fly shift", rather than, as I would strongly prefer, as "change
from average".

Generally, if there are terms \(a_k\) in a model and we have weights \(w_k\) and would like to enforce $$ \sum_{k} w_ka_k = 0 $$ it suffices to ask that the square of \((\sum w_ka_k)^2\) should be small; expanding the square and interpeting the coefficients of each \(a_ia_j\) as the element \(K_{ij}\) of the penalty matrix \(K\) does the trick.

So, after forming the design matrix \(X\), but before considering the on-ice results \(Y\), we can obtain the relevant weights \(w_k\) with which to encode our prior expectation that shift-start terms should be, in aggregate, zero-sum.

For instance, if \(i\) is the index for the neutral zone term, and 17.5% of shifts in a given season begin in the neutral zone; and \(j\) is the index for on-the-fly starts, and 60.5% of shifts in a given season begin on-the-fly; then \(K_{ij}\) is set to the product of 17.5% with 60.5%; similarly with every ordered pair of zone terms to give sixteen non-zero entries in \(K\).

In the same way, we enforce that:

- The score terms should (weighted) sum to zero;
- The rest terms should sum to zero;
- The six "structure" (period and home/away) terms should sum to zero;
- All of the coaching terms for all of the teams taken together should sum to zero;
- For
*each*coach, the score-specific system terms should sum to zero (without making any demands on the "overall" or the "shell" coaching system terms). This last point is to enforce our ideas that each specific coach score system term should encode the*changes*to their usual system that each coach makes in that score state.

All of these pooling penalties are multiplied by an extremely strong factor (a million times larger than the 10,000 penalty for the coaches and players above). Deviation from average for players or coaches is increasingly unlikely (but not impossible) as the deviation grows; here deviations from the desired sums are contradictions in terms.

The model can be fit to any length of time; in this article I'll be describing the results of fitting it iteratively on each season from 2007-2008 through 2021-2022 in turn. For 2007-2008, we use "NHL average"; for later seasons I use the estimate from the previous season as the prior for each column, when present.

So, after all that, the thing we would like to put our impatient hands on is the vector \(\beta\) of estimates which minimizes the following expression: $$ ||Y - X\beta||_W^2 + ||\beta-\beta_0||_\Lambda^2 + ||\beta||_K^2$$

Happily, the usual methods (that is, differentiating with respect to \(\beta\) to find the unique minimum of the error expression) gives a closed form for \(\beta\) as: $$ \beta = (X^TWX + \Lambda + K)^{-1}(X^TW Y + \Lambda \beta_0) $$ In effect, instead of assuming every season that the league is full of new players about whom we know nothing, we use all of the information from the last dozen years, implicitly weighted as seasons pass to prefer newer information without ever discarding old information entirely.

Persnickety folks, who might wonder if there really *is* a unique minimum to the
complicated error expression we wish to minimize, may rest assured that it suffices for both
of the penalty matrixes
\(\Lambda\) and \(K\) to be positive semi-definite, which they are, as motivated
readers may verify at their leisure. (For the
etymologically and historically curious, ridge regression was invented in the first place
by folks who were interested in solving problems where the matrix \(X^TWX\) was not
invertible because a certain subspace of the columns of \(X\) was "too flat" in some
quasi-technical sense. The artificial inserted matrix \(K\) adds a "ridge" in this
notional geometry and makes the sum \(X^TWX + K\) conveniently invertible. The Bayesian "prior" interpretation,
so important to my approach here, was discovered somewhat later.)

Every column in the regression corresponds to a map of shot rates over a half-rink. The simplest are perhaps the six "game state" terms:

Unsurprisingly, the home team has an advantage in each period, while the second period shows
an uptick in shot danger for both teams. Perhaps more surprisingly, the third period shows
a *decrease* in shots for both teams relative to the first period, even after accounting
for score effects.

All of the maps are depicted here are to be understood as relative to league average expected goals for the season in question. Regions in red show more-and-more-dangerous shots coming from a given region of the ice than average, and blue regions show fewer-and-less-dangerous shot patterns than average. White regions see shot patterns that are roughly as dangerous as average. A full explanation of this expected goals model can be found here and the cleverness required to encode xG rates in pictures here.

For convenience, the xG rate of the term, relative to baseline 5v5 xG rate, is also shown
in the neutral zone. So, displayed above, the effect on shots to being the home team in the second
period +12.6% xG/60, which
means that simply being the home team (in *addition* to any benefit gained by matchups)
is associated with generating a pattern of shots likely to result in 12.6% more goals per hour
than league average, given average shooting and goaltending talent.

The six score terms are as follows:

As we know, trailing teams dominate play, even though they still usually lose. This "global" pattern (that is, across the entire league, isolated from the system effects of any coaches) is not quite linear. Tied states are associated with cagey, negative hockey with fewer and less dangerous chances for both home and away teams.The fatigue terms are as follows:

Here "00" means "did not play last night or the night before", what I've called "well-rested"; "01" means "played two nights ago but not last night", this is "normal" and is the most common rest pattern. Finally "10" means "played last night but not the night before", this is the "tired" state which is associated with weaker results as we expect. (In rare cases (trades, reschedulings) a player might play NHL games on three consecutive nights, these players are encoded as "10"). Being well-rested is less beneficial (and more common) than being tired.

The three zone terms are as follows:

The pooling penalties permit us to compare all of the zone starts to one another directly. As expected, starting in the offensive zone helps boost shot rates considerably, and starting in your own zone depresses your shot rates even more. Perhaps surprisingly, starting a shift in the neutral zone depresses shot rates nearly as much; the blue lines (or, more to the point, the offside rules) are formidable obstacles. The on-the-fly term being positive is evidence that the feeling of games with fewer whistles being more exciting is not an illusion caused by total running time being shorter; such games really do have more and more dangerous 5v5 shots.

The two penalty-residual terms are as follows:

The immediate aftermath of a penalty is, strictly speaking, 5v5 play, but it is extremely
chaotic; when the skater serving the penalty returning to the ice is a defender it can be
especially so. Usually this "residual" time is very short-lived, with the team coming off
the power-play (who are usually the one with the puck) trying to urgently
force a play to the net. The shot rates for this "power-play residual" period are very, very
high, even higher than for the bulk of power-plays themselves, where a little more patience
is common. Somewhat more interesting is the fact that the "penalty-kill residual" (the same
stretches of time, considered from the attacking point of the view of the team which has just
killed off a penalty) is *also* characterized by more dangerous rates of shots. The obvious
play here is the penalized-skater-on-a-breakaway, but other opportunistic counterattacking rushes
also boost this somewhat.

One obvious reason to construct such a model is to suss out the abilities of players, which is intrinsically interesting. However, we can also make comparisons about how much each of the various factors in our models affect play.

Before I describe the model outputs, I turn first to the raw observed results from the 2020-2021 regular season.

This graph is constructed as follows: for every skater who played any 5v5 minutes,
compute the xG created and allowed by their team while they were on the ice;
this produces a point \((x,y)\). Then, form the density map of all such points, where each point
is weighted by the corresponding number of minutes played by the player in question. For ease
of interpretation, I've scaled the xG values by league average, so that a value
of \((5,5)\) on the graph means "threating to score 5% more than league average, and also
threatening to be scored on 5% more than league average". As is my entrenched habit, the
defensive axis is inverted, so results that are favourable to the skater in question appear in the
top right (marked "GOOD" so that there can be no doubt). The contours are chosen so that ten
percent of the point mass is in the darkest region,
another ten percent in the next region, and so on. The final ten percent of the point mass
is in the white region surrounding the shaded part of the graph. For convenience the weighted
sum of the values is marked with a red dot; this dot represents the centre of the mass of the
distribution, on which you could balance the whole shooting match on the tip of your
steady fingertip. The black dot is the *unweighted* average.

Repeating the above process with the individual player marginal estimates gives the following graph in green. The overall shape is still broadly normal, but the offence is slightly right-skewed (as is to be expected, considering the fact that rookies are penalized as they are).

One guiding principle of mine is that I don't include any
terms in the model itself
that identify players by position, since I would like to be able to *measure* differences
between positions. With that in mind, here is the same density as above, but only for forwards:

Not surprisingly, forwards generate somewhat more offence, on average. In both cases the weighted averages skew slightly to "good" compared to the unweighted averages, which is consistent with coaches giving more icetime to their better players.

Once I have individual estimates for players in hand, I can make many interesting secondary
computations to show the distribution of various effects. Most obviously, for a given player,
I can form the sum of the player estimates of all the given player's *teammates*, weighted
by their shared icetime, and then multiply it by four (since every player has four teammates
at 5v5). These estimates of teammate quality can then be graphed as above:

Since I centred the plot of the player ability distribution, this one is also centred.

The same computation can be done for any given players 5v5 opponents: form the sum of all of their isolates, weighted by head-to-head icetime, and then multiply by five, since every player has five opponents at 5v5. This is graphed below in red:

First, notice that the scale on the axes is smaller than for teammates; more discussion of that will follow later. The variation in competition quality is more pronounced offensively, with the range of defensive ability faced by players is much smaller.

If we add together the effect of each player's teammates and the effect of their competition, we obtain a distribution that is roughly normal around zero, as expected.

Since coaches change and players change teams, and players do not play in every score state equally, not every player is affected by coaching systems the same amount. That said, there are only around thirty-five or forty head coaches in the league each year, so the distribution of coaching effects on players is lumpier.

The above shows the impact on *players* due to coaches, both the general terms, the
score terms, and the
shell terms, as appropriate. To see the "overall" coach terms specifically, I've condensed them here:

The "shell" terms, which are applied *additionally* for teams tied or leading by one
or two in the the third period, are as follows:

As experience watching suggests, most coaches/players respond to late high-defensive-leverage situations by playing worse, especially worse defensively; although on a league-wide level this is much less pronounced than it once was.

To get some notion of "total" coach impact for each coach, I form the weighted sum of the overall system term with 0.2 times the "shell" term, since approximately 20% of the game is played in these states. This "synthetic" coach impact is as follows:

Strictly speaking, residuals for a regression refer to the differences between the individual observations (that is, each stint) and the predicted shot rates for that stint. As a perhaps more insightful alternative, for each player, I can compute the difference between their raw (observed) 5v5 on-ice results and what I would expect from computing the model outputs associated with the observed players and the zones and scores and home-ice advantage they player under. This is shown below:

This makes a sort of "goodness of fit" measure. The obviously circular shape is encouraging; the skew towards "fun" from previous years is now gone, which is pleasing.

In the above, I have shown each distribution on its own scale, so that I could discuss the shape of each one in turn. However, to understand their relative importance, they should all be placed on the same scale, which I have done below (except the residuals):

Here there are many interesting insights to be had:

- The teammate distribution is
*much*bigger than the competition distribution, in agreement with many previous studies showing that variation in competition (which is only loosely controlled by coaches) is much smaller than the variation in teammates, which coaches control almost completely. However, there are certain players for whom the net impact of competition is much larger than that of teammates, even over the scale of full seasons. In general, a careful analysis should always begin with teammates but also include competition and contextual effects. - Controlling for teammates, competition, and zone effects, as we do, the aggregate size of score effects is surprisingly small—almost negligible. Within a single game the score is important; at the scale of a whole season it is not, for most players.
- Zone effects are also surprisingly small; their total extent is considerably smaller than competition effects which are themselves smaller than teammate effects. By focussing on only offensive zone faceoffs and defensive zone faceoffs, as some analyses do, differences between contexts which are in fact quite small can appear heavily inflated.
- Coaching
*system*effects, over and above coaching choices like score and zone usage, have an effect broadly similar to that of competition. - The fatigue distribution is incredibly tiny, invisible in comparison to the others. (In fact it is so small it can't be seen on axes at this scale, so I didn't graph it)

Using zero-biased (also known as "regularized") regression in sports has a long history; the first application to hockey that I know of is the work of Brian MacDonald in 2012. His paper notes many earlier applications in basketball, for those who are curious about history; also I am very grateful for many useful conversations with Brian during the preparation of the first version of Magnus. Shortly after MacDonald's article followed a somewhat more ambitious effort from Michael Schuckers and James Curro, using a similar approach. Persons interested in the older history of such models will be delighted to read the extensive references in both of those papers.

More recently, regularized regression has been the foundation of WAR stats from both Emmanuel Perry and Josh and Luke Younggren, who publish their results at Corsica (now sadly defunct) and Evolving-Hockey, respectively.

Finally, I am very thankful to Luke Peristy for many helpful discussions, and to the generalized ridge regression lecture notes of Wessel N. van Wieringen which were both of immense value to me.

As far as I can tell, the extension of ridge regression to functions (that is, shot maps instead of just single numbers) is new, at least in this context.

While my research has always been free to the public and will remain so, I restrict access to the specific regression outputs for players and coaches to website subscribers. To gain access, please subscribe at any level; then after logging in you should be able to find coaching terms, and individual player terms are on the career pages for each player.